Brightness follow sun

usermods/usermod_v2_brightness_follow_sun/README.md

@@ -0,0 +1,33 @@
+# Update Brightness Follow Sun
+
+This UserMod can set brightness by mapping [minimum-maximum-minimum] from [sunrise-suntop-sunset], I use this UserMod to adjust the brightness of my plant growth light (pwm led), and I think it will make my plants happy.
+
+This UserMod will adjust brightness from sunrise to sunset, reaching maximum brightness at the zenith of the sun. It can also maintain the lowest brightness within 0-6 hours before sunrise and after sunset according to the settings.
+
+## Installation
+
+define `USERMOD_BRIGHTNESS_FOLLOW_SUN` e.g. `#define USERMOD_BRIGHTNESS_FOLLOW_SUN` in my_config.h
+
+or add `-D USERMOD_BRIGHTNESS_FOLLOW_SUN` to `build_flags` in platformio_override.ini
+
+
+### Options
+Open Usermod Settings in WLED to change settings:
+
+`Update Interval Sec` - The unit is seconds, and the brightness will be automatically refreshed according to the set parameters.
+
+`Min Brightness` - set brightness by map of min-max-min : sunrise-suntop-sunset
+
+`Max Brightness` - It needs to be set to a value greater than `Min Brightness`, otherwise it will always remain at `Min Brightness`.
+
+`Relax Hour` - The unit is in hours, with an effective range of 0-6. According to the settings, maintain the lowest brightness for 0-6 hours before sunrise and after sunset.
+
+
+### PlatformIO requirements
+
+No special requirements.
+
+## Change Log
+
+2025-01-02
+* init

usermods/usermod_v2_brightness_follow_sun/usermod_v2_brightness_follow_sun.h

@@ -0,0 +1,130 @@
+#pragma once
+
+#include "wled.h"
+
+//v2 usermod that allows to change brightness and color using a rotary encoder, 
+//change between modes by pressing a button (many encoders have one included)
+class UsermodBrightnessFollowSun : public Usermod
+{
+private:
+  static const char _name[];
+  static const char _enabled[];
+  static const char _update_interval[];
+  static const char _min_bri[];
+  static const char _max_bri[];
+  static const char _relax_hour[];
+
+private:
+  bool enabled = false; //WLEDMM
+  unsigned long update_interval = 60;
+  unsigned long update_interval_ms = 60000;
+  int min_bri = 1;
+  int max_bri = 255;
+  float relax_hour = 0;
+  int relaxSec = 0;
+  unsigned long lastUMRun = 0;
+public:
+
+  void setup() {};
+
+  float mapFloat(float inputValue, float inMin, float inMax, float outMin, float outMax) {
+    if (inMax == inMin) 
+      return outMin;
+
+    inputValue = constrain(inputValue, inMin, inMax);
+
+    return ((inputValue - inMin) * (outMax - outMin) / (inMax - inMin)) + outMin;
+  }
+
+  uint16_t getId() override
+  {
+    return USERMOD_ID_BRIGHTNESS_FOLLOW_SUN;
+  }
+
+  void update() 
+  {
+    if (sunrise == 0 || sunset == 0 || localTime == 0)
+      return;
+
+    int curSec = elapsedSecsToday(localTime);
+    int sunriseSec = elapsedSecsToday(sunrise);
+    int sunsetSec = elapsedSecsToday(sunset);
+    int sunMiddleSec = sunriseSec + (sunsetSec-sunriseSec)/2;
+
+    int relaxSecH = sunriseSec-relaxSec;
+    int relaxSecE = sunsetSec+relaxSec;
+
+    int briSet = 0;
+    if (curSec >= relaxSecH && curSec <= relaxSecE) {
+      float timeMapToAngle = curSec < sunMiddleSec ?
+                    mapFloat(curSec, sunriseSec, sunMiddleSec, 0, M_PI/2.0) :
+                    mapFloat(curSec, sunMiddleSec, sunsetSec, M_PI/2.0, M_PI);
+      float sinValue = sin(timeMapToAngle);
+      briSet = min_bri + (max_bri-min_bri)*sinValue;
+    }
+
+    bri = briSet;
+    stateUpdated(CALL_MODE_DIRECT_CHANGE);
+}
+
+  void loop() override
+  {
+    if (!enabled || strip.isUpdating())
+      return;
+
+    if (millis() - lastUMRun < update_interval_ms)
+      return;
+    lastUMRun = millis();
+
+    update();
+  }
+
+  void addToConfig(JsonObject& root)
+  {
+      JsonObject top = root.createNestedObject(FPSTR(_name)); // usermodname
+
+      top[FPSTR(_enabled)] = enabled;
+      top[FPSTR(_update_interval)] = update_interval;
+      top[FPSTR(_min_bri)] = min_bri;
+      top[FPSTR(_max_bri)] = max_bri;
+      top[FPSTR(_relax_hour)] = relax_hour;
+  }
+
+  bool readFromConfig(JsonObject& root)
+  {
+    JsonObject top = root[FPSTR(_name)];
+    if (top.isNull()) {
+      DEBUG_PRINTF("[%s] No config found. (Using defaults.)\n", _name);
+      return false;
+    }
+
+    bool configComplete = true;
+
+    configComplete &= getJsonValue(top[FPSTR(_enabled)], enabled, false);
+    configComplete &= getJsonValue(top[FPSTR(_update_interval)], update_interval, 60);
+    configComplete &= getJsonValue(top[FPSTR(_min_bri)], min_bri, 1);
+    configComplete &= getJsonValue(top[FPSTR(_max_bri)], max_bri, 255);
+    configComplete &= getJsonValue(top[FPSTR(_relax_hour)], relax_hour, 0);
+
+    update_interval = constrain(update_interval, 1, SECS_PER_HOUR);
+    min_bri = constrain(min_bri, 1, 255);
+    max_bri = constrain(max_bri, 1, 255);
+    relax_hour = constrain(relax_hour, 0, 6);
+
+    update_interval_ms = update_interval*1000;
+    relaxSec = SECS_PER_HOUR*relax_hour;
+
+    lastUMRun = 0;
+    update();
+
+    return configComplete;
+  }
+};
+
+
+const char UsermodBrightnessFollowSun::_name[]                PROGMEM = "Brightness Follow Sun";
+const char UsermodBrightnessFollowSun::_enabled[]             PROGMEM = "Enabled";
+const char UsermodBrightnessFollowSun::_update_interval[]     PROGMEM = "Update Interval Sec";
+const char UsermodBrightnessFollowSun::_min_bri[]             PROGMEM = "Min Brightness";
+const char UsermodBrightnessFollowSun::_max_bri[]             PROGMEM = "Max Brightness";
+const char UsermodBrightnessFollowSun::_relax_hour[]          PROGMEM = "Relax Hour";

wled00/const.h

@@ -205,6 +205,7 @@
 #define USERMOD_ID_PIXELS_DICE_TRAY      54     //Usermod "pixels_dice_tray.h"
 #define USERMOD_ID_DEEP_SLEEP            55     //Usermod "usermod_deep_sleep.h"
 #define USERMOD_ID_RF433                 56     //Usermod "usermod_v2_RF433.h"
+#define USERMOD_ID_BRIGHTNESS_FOLLOW_SUN 57     //Usermod "usermod_v2_brightness_follow_sun.h"
 
 //Access point behavior
 #define AP_BEHAVIOR_BOOT_NO_CONN          0     //Open AP when no connection after boot

wled00/usermods_list.cpp

@@ -250,6 +250,10 @@
   #include "../usermods/usermod_v2_RF433/usermod_v2_RF433.h"
 #endif
 
+#ifdef USERMOD_BRIGHTNESS_FOLLOW_SUN
+  #include "../usermods/usermod_v2_brightness_follow_sun/usermod_v2_brightness_follow_sun.h"
+#endif
+
 void registerUsermods()
 {
 /*
@@ -486,4 +490,8 @@ void registerUsermods()
   #ifdef USERMOD_RF433
   UsermodManager::add(new RF433Usermod());
   #endif
+
+  #ifdef USERMOD_BRIGHTNESS_FOLLOW_SUN
+  UsermodManager::add(new UsermodBrightnessFollowSun());
+  #endif
 }