PCI: brcmstb: Use same constant table for config space access

The constants EXT_CFG_DATA and EXT_CFG_INDEX vary by SOC. One of the
map_bus methods used these constants, the other used different
constants.  Fortunately there was no problem because the SoCs that used
the latter map_bus method all had the same register constants.

Remove the redundant constants and adjust the code to use them.
In addition, update EXT_CFG_DATA to use the 4k-page based config
space access system, which is what the second map_bus method was
already using.

Signed-off-by: Jim Quinlan <[email protected]>

drivers/pci/controller/pcie-brcmstb.c

@@ -151,9 +151,6 @@
 #define  MSI_INT_MASK_SET		0x10
 #define  MSI_INT_MASK_CLR		0x14
 
-#define PCIE_EXT_CFG_DATA				0x8000
-#define PCIE_EXT_CFG_INDEX				0x9000
-
 #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
 #define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
 
@@ -728,8 +725,8 @@ static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
 
 	/* For devices, write to the config space index register */
 	idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
-	writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
-	return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
+	writel(idx, base + IDX_ADDR(pcie));
+	return base + DATA_ADDR(pcie) + PCIE_ECAM_REG(where);
 }
 
 static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
@@ -1712,15 +1709,15 @@ static void brcm_pcie_remove(struct platform_device *pdev)
 static const int pcie_offsets[] = {
 	[RGR1_SW_INIT_1]	= 0x9210,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4204,
 	[PCIE_INTR2_CPU_BASE]	= 0x4300,
 };
 
 static const int pcie_offsets_bcm7278[] = {
 	[RGR1_SW_INIT_1]	= 0xc010,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4204,
 	[PCIE_INTR2_CPU_BASE]	= 0x4300,
 };
@@ -1734,8 +1731,9 @@ static const int pcie_offsets_bcm7425[] = {
 };
 
 static const int pcie_offsets_bcm7712[] = {
+	[RGR1_SW_INIT_1]	= 0x9210,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4304,
 	[PCIE_INTR2_CPU_BASE]	= 0x4400,
 };