dts: bcm2712: cm5: Force the ANT pins to GPIOs

The magic required to make requesting a GPIO automatically change the pinmux settings is currently absent. Work around that by explicitly requesting that the ANT pins be in GPIO mode. Signed-off-by: Phil Elwell <[email protected]>
6by9 · Apr 19, 2024 · 0c341f4 · 0c341f4
1 parent 8f5ca7f
commit 0c341f4
Showing 1 changed file with 4 additions and 1 deletion.
diff --git a/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi b/arch/arm/boot/dts/broadcom/bcm2712-rpi-cm5.dtsi
@@ -359,6 +359,9 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_gpio2        { };
 };
 
 &pinctrl_aon {
+	ant_pins: ant_pins {
+		function = "gpio";
+		pins = "aon_gpio5", "aon_gpio6";
 	};
 
 	/* Slight hack - only one PWM pin (status LED) is usable */
@@ -461,7 +464,7 @@ dpi_16bit_gpio2:        &rp1_dpi_16bit_gpio2        { };
 
 /* SDIO2 drives the WLAN interface */
 &sdio2 {
-	pinctrl-0 = <&sdio2_30_pins>;
+	pinctrl-0 = <&sdio2_30_pins>, <&ant_pins>;
 	pinctrl-names = "default";
 	bus-width = <4>;
 	vmmc-supply = <&wl_on_reg>;