From 695b7a28135af2533b02cdf28151c2052dbfe83a Mon Sep 17 00:00:00 2001 From: Henri Bergius Date: Sun, 15 Dec 2024 10:33:36 +0000 Subject: [PATCH] Pressure salt water --- docs/systems/plumbing.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/systems/plumbing.md b/docs/systems/plumbing.md index f258ead..e348ab1 100644 --- a/docs/systems/plumbing.md +++ b/docs/systems/plumbing.md @@ -41,7 +41,7 @@ The raw water system has one intake in the engine space. There is a strainer aft * Galley sea water tap (separate shut-off under galley sink) * Watermaker (separate shut-off under galley sink) -The sea water tap and the watermaker should only be opened in clean sea water. +The sea water tap and the watermaker should only be opened in clean sea water. The sea water system is pressurised, with the power button under the sink. **Note: watermaker and galley freshwater tap should be closed when running the engine to prevent air from entering the system** @@ -51,7 +51,7 @@ The sea water tap and the watermaker should only be opened in clean sea water. - [ ] Ensure engine raw water seacock and the watermaker valve are open - [ ] Check watermaker filter visually, change or clean as needed - [ ] Run the watermaker output hose into the sink -- [ ] Start watermaker by turning on the circuit +- [ ] Start watermaker by turning on the circuit and pressing the power button under the sink - [ ] Run watermaker for about 10 minutes, then run the output into a cup - [ ] Test the water quality with TDS meter (should be <300ppm) - [ ] Taste test the water