Deep Mini-ITX

[raspbeguy]

Hello, does someone tried to fit deep mini-ITX motherboard on a mini rack ?

Deep mini-ITX form factor is 6.7" x 8.2" (for instance ASRock AM5D4ID-2T/BCM) so same width than mini-ITX, and same screw holes so I thing it will fit in the DeskPi mini-ITX shelf but it is slightly deeper than the DeskPi Rackmate (max 20 cm). Some racks like the L-com Half Rack Frame Rack are deeper but I don't know if the forementioned shelf can be installed in it.

[geerlingguy]

I haven't tried it, but it seems like on the default shelves it would stick out the front a little.

[hamiller]

i do have an mini itx board installed and running within such a rack

usinf this rack: https://www.amazon.de/dp/B009DGMPIM

[raspbeguy]

@hamiller I was asking about deep mini-ITX. It's slightly deeper.

[hamiller]

a, i see, sorry!

nevertheless: I've attached my board to a 3d printed frame and just taped that to a 10" tray.
so measuring gives me:
start of board to back plate of the rack: ~ 215mm. (from the start to to front plate are additional ~80mm.

So i'd think your deep itx would also fit 🤷

[geerlingguy]

Is Deep Mini ITX the same as mini-DTX? https://en.wikipedia.org/wiki/DTX_%28form_factor%29